Turbosmart Gen V Electronic HyperGate 45 External Wastegate
TS-0553-1502
Turbosmart’s Patent Pending, eWG45 is a fully electronic actuated 45mm wastegate – Built on the successful, class leading GenV HyperGate45 architecture, now with the kind of control never seen before.
Starting with a Turbosmart’s GenV wastegate body, you can be confident the mounting orientation will match your existing manifold & outlet hardware. The GenV Hypergate45 already had class leading flow capacity & heat handling characteristics. Now featuring the Turbosmart Patent Pending eWG actuator system, you can be sure of unparalleled control aswell.
There are no springs, no hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone are ‘Minimum’ boost levels associated with base spring pressure or the heat related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to ‘All of it’ – All from your laptop or tuning interface.
Features
Class Leading, CFD & Bench Validated Flow Performance
Nitronic 60 Valve Guide & High Temp 347 SS Body
Liquid Cooled, Electronic Actuator
Strap Type V-band clamps
User Adjustable Actuator Position
Onboard Analog 0-5V Wastegate Position Sensor
Onboard Analog 0-5V Actuator Temperature Sensor
Size: 1/8 NPT
Part No: TS-0553-1502
Yes. The Turbosmart eWG range works with the modular housings of the Gen-V products, so wherever your Turbosmart Gen-V products are fitted, the eWG will bolt on as they use the same mounting & flange orientation. The Actuator housings of the new eWG range are different though, so you’ll need to make sure there is room for the new design in your engine bay.
How fast is the eWG range?
72mm per second – Full travel can be achieved in 290ms. Fast.
What spring options does the eWG range have?
Just the one option: None. The Turbosmart eWG is fully adjustable without the need for springs. It can actuate boost against extreme levels of back pressure and does so without any springs. Nothing to change, ever. It also features a special ‘zero-back-drive’ to further bolster its ability against high drive pressures.
Can I use an eWG instead of my Compressed Gas (co2) setup?
Yes you can – In fact, it’s one of the situations that the eWG would be ideal for. You will not need the external compressed gas tank, the lines or the solenoid – You just need the eWG.
What do I need to control it?
You will need a programmable ECU (Engine Control Unit). You will need a ‘high current’ (20amp) output and a spare analogue input to make it work. Most quality ECU’s have the capability to drive the gate for accurate boost control. Best speak to your specialist, or calibrator about your needs if you have any questions on what is needed.
Can I rotate the top housing?
Yes. The modular design of the GenV Range of External Wastegates means you can rotate the actuator housing 360 degrees, for virtually unlimited orientation.
Pairs well with
Turbosmart Gen V Electronic HyperGate 45 External Wastegate
Get Expert Fitment and Technical Advice from Industry Specialists.
-
Shipping Information
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Mk5 R32 Turbo. I have had the best experience top quality service I would not think about going anywhere else! From helping me install my ecu over the phone with help on wiring sensors troubleshooting I would have been totally lost not to mention the remote mapping service so I was able to fit it in around work and other things the car runs like a dream pulls hard in all gears and is music to my ears. I will not take my cars anywhere else 5* Thank you for bringing my project to life
Something came up that required me to get a car part urgently and under a time limit and I was having trouble tracking down local businesses that could source it for me. Luckily, I came across Sameer’s contact information and reached out. He was brilliant - answered my query over the phone, got the part ordered as soon as was physically possible and kept me updated every step of the order and delivery process. He solved my issue with professionalism and expertise. Very happy with the service received.
Sam always does a quality job when it's comes to mapping my car. It has been with Sam multiple times for mapping, tweeking and problem solving and is very knowledgeable when it comes to ECU masters. The passion toward cars and mapping reflects in his work!
Absolutely great services. Great communication. Always ready to help. My car is now faster, more reliable, and made way more power. Sam is the man.
Great mapper. Have full confidence in him, helped out with everything i needed even when some things were not right with the car. Highly recommend👍