Syvecs Power Distribution Unit Module PDU34A
PDU34A
Syvecs Power Distribution units are designed to replace the use of a conventional relay boxs. It provides multi channel solid state logic driven processing, which is fully software configurable using our PDU cal tool. Features include logic inputs and power outputs with validation and debounce settings. RS232 and CAN provide communication to external displays and data loggers.
The PDU34A offers advanced features such as the ability to sleep and wake via CAN bus messaging or by using hardware input pins as triggers. The PDU34A comes equipped with an impressive 34 programmable outputs in total, including 10 extremely capable multifunction outputs which can be defined by the user to operate in either discreet high-side or low-side switching, low-side PWM, Half or Full bridge operation. These flexible outputs, as well as the PDU34's 16 input channels, can be used to increase the I/O compliment of our S7, S8 and S12 Ecus connected using our extremely fast slave link Canbus to drive engine control solenoids or actuators.
Outputs:
34 main Power Outputs, 30 outputs rated to 30A, 4 outputs rated to 8A
10 multifunction high side, low side, PWM, H-Bridge, soft start outputs
(peak current 100A)
20 High Side outputs (peak current 125A)
Output teaming to support very high current devices
All outputs short circuit and thermally protected with multi-stage in-rush control
Combined diagnostic output with reset input
Up to 64 soft outputs via CAN
Inputs:
16 physical switch inputs or, when slaved, general purpose analogue sensor inputs including:
8x frequency measurement inputs (4 optionally bi-polar)
software selectable 3k ohm pull-up resistors
4x inputs capable of programmable “wake up” functionality
Dedicated wake pin
Up to 64 soft inputs via CAN with configurable validation and debounce time
Comms:
x2 100Mbit/s full duplex Ethernet (can be used as Ethernet switch)
x3 CAN 2.0B
RS232C serial interface
LIN Bus
Physical:
6.5V to 40V input voltage
Dedicated 12V logic power input
Regulated 5V sensor supply output with short circuit protection
x2 Deutsch 16 way Power Connectors
x1 Deutsch 32way Connector
x1 M6 Power Stud
Machined Aluminium enclosure
995g
Operating Temperature -20 to +85C
Pairs well with
Syvecs Power Distribution Unit Module PDU34A
Get Expert Fitment and Technical Advice from Industry Specialists.
-
Shipping Information
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Mk5 R32 Turbo. I have had the best experience top quality service I would not think about going anywhere else! From helping me install my ecu over the phone with help on wiring sensors troubleshooting I would have been totally lost not to mention the remote mapping service so I was able to fit it in around work and other things the car runs like a dream pulls hard in all gears and is music to my ears. I will not take my cars anywhere else 5* Thank you for bringing my project to life
Something came up that required me to get a car part urgently and under a time limit and I was having trouble tracking down local businesses that could source it for me. Luckily, I came across Sameer’s contact information and reached out. He was brilliant - answered my query over the phone, got the part ordered as soon as was physically possible and kept me updated every step of the order and delivery process. He solved my issue with professionalism and expertise. Very happy with the service received.
Sam always does a quality job when it's comes to mapping my car. It has been with Sam multiple times for mapping, tweeking and problem solving and is very knowledgeable when it comes to ECU masters. The passion toward cars and mapping reflects in his work!
Absolutely great services. Great communication. Always ready to help. My car is now faster, more reliable, and made way more power. Sam is the man.
Great mapper. Have full confidence in him, helped out with everything i needed even when some things were not right with the car. Highly recommend👍