MaxxECU Race

Vendor:MAXXECU

MaxxECU Race

£1,182.00 GBP

SKU_1720542340367_281

MaxxECU RACE / RACE H2O

Product no: 1783 / 1896
  • Extremely versatile engine control system for powerful engines with up to 8 sequential cylinders. Up to 12 in wasted spark
  • Faster and easier tuning with built-in wideband lambda and a built-in MAP-sensor up to 3 bar / 43.5 psi of boost
  • Get into serious tuning with advanced functions such as built-in E-throttle, 8 EGT, knock sensor inputs and superfast Cortex M3 CPU
Selected features
  • Anti-lag and launch
  • E-Throttle
  • Knock control
  • Built-in wideband
  • Shift-cut and internal loggings
  • Flexfuel
  • Variable valve timing
  • CAN bus
  • Traction control
  • 2 knock sensor inputs
  • 8 built-in EGT (in harness)
  • 8 injector output (high/low impedance)
  • 8 ignition outputs
  • 9 extra (GND) outputs
  • 2 extra (+12V) outputs
  • 2 extra outputs for E-Throttle
  • 8 extra analog inputs
  • 4 extra digital/VR inputs
  • Bluetooth


Target engines of MaxxECU RACE
  • All 1-12 cylinder engines (4-stroke)
  • Up to 8 cylinders fully sequentially
  • Up to 12 cylinders in wasted spark
MaxxECU RACE inputs
  • Intake air temperature sensor (IAT)
  • Coolant temperature sensor (CLT)
  • Throttle position sensor (TPS)
  • Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
  • 2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
  • 2 extra temperature sensors. Can be used as switches or control of additional functions
  • 2 knock sensor inputs
  • 6 extra 0-5V inputs. Can be used for additional sensors such as measurement oil/fuel pressure
  • 4 extra digital inputs used for example speed sensors (VR / Hall) or switches
  • 8 EGT TYPE-K/N inputs (1200C/2200F) in separate harness
MaxxECU RACE outputs
  • 8 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
  • 8 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
  • 9 extra LOW DRIVING outputs for additional features. Can be adjusted to control virtually anything like fuel pumps, idle valves. GPO 1-8,10 (2A), GPO 9 (5A)
  • 2 extra +12V DRIVING outputs (GPO 15,16) (2A)
  • 4 extra motor outputs (ex E-Throttle). GPO 11-14 (2A)
MaxxECU RACE technical
  • CAN bus for expansion modules, OEM vehicle CAN, OBDII
  • USB communication for tuning with MTune
  • Bluetooth for connecting to mobile devices with MDash
  • 8MB memory for internal logging, up to 1000Hz.
  • Supply voltage 8-22V
  • ARM Cortex-M3 120MHz main processor. Three extra processors to handle the trigger, injectors and knock detection
  • Resolution on ignition: 0.1 degrees
  • Resolution on injectors: 0.001 ms
  • Updates the fuel and ignition calculations 2000 times per second
  • The fastest PC communication on the market
  • 50Hz sampling rate on all EGT inputs
  • 1000Hz sampling rate on all analog inputs
  • Weight: 880g
  • 155x195x40mm (including mounting points, excluding connector)

Pairs well with
Fabo Barrett
Fabo Barrett
12 months ago

Mk5 R32 Turbo. I have had the best experience top quality service I would not think about going anywhere else! From helping me install my ecu over the phone with help on wiring sensors troubleshooting I would have been totally lost not to mention the remote mapping service so I was able to fit it in around work and other things the car runs like a dream pulls hard in all gears and is music to my ears. I will not take my cars anywhere else 5* Thank you for bringing my project to life

camille.
camille.
a year ago

Something came up that required me to get a car part urgently and under a time limit and I was having trouble tracking down local businesses that could source it for me. Luckily, I came across Sameer’s contact information and reached out. He was brilliant - answered my query over the phone, got the part ordered as soon as was physically possible and kept me updated every step of the order and delivery process. He solved my issue with professionalism and expertise. Very happy with the service received.

Ross Thompson
Ross Thompson
a year ago

Sam always does a quality job when it's comes to mapping my car. It has been with Sam multiple times for mapping, tweeking and problem solving and is very knowledgeable when it comes to ECU masters. The passion toward cars and mapping reflects in his work!

Barrington Cummings
Barrington Cummings
a year ago

Absolutely great services. Great communication. Always ready to help. My car is now faster, more reliable, and made way more power. Sam is the man.

Mesum Naqvi
Mesum Naqvi
8 months ago

Great mapper. Have full confidence in him, helped out with everything i needed even when some things were not right with the car. Highly recommend👍