CANchecked MFD15 Multi Function Display - Can Bus Connection
CAN-CC01000
With our MFD15 we bring the Can Bus into the 52mm display
THE MFD15 - KEY FEATURES
Best legibility thanks to OLED technology
freely programmable control units and OBD2 connection
FOUR analog inputs for additional sensors (oil temperature, oil pressure, fuel pressure)
freely definable warning thresholds per sensor
integrated shift light LED - freely configurable
Sensors
- min: lowest value that has occurred
- min warn: Value from which a warning is issued if the value is undershot
- max: highest value that has occurred
- max warn value: value from which a warning is given if it is exceeded
- Beep: a tone is emitted when the "min/max warning value" is exceeded or not reached
- Popup: If the value falls below or exceeds the "min/max warning value", a popup window is displayed
- RefSensor: only when this sensor...
- RefValue: ... above this value will be warned
Shift light
- 8 values ​​- each individually adjustable
- speed limits
- Colours
- Flash speed - the entire shift light flashes
- Shift light brightness
Warnings
In the displays themselves, values ​​that have been exceeded are shown in red and values ​​that have not been reached are shown in blue.
If a sensor is undercut/exceeded that is not currently displayed, the sensor setting determines what happens: popup, warning buzzer or just a small yellow triangle in the top right corner of the status bar.
Representation of exceeded and undershot values
Exceeding or falling below a sensor can be displayed in various ways:
1) Sensor is not in the current display: as soon as a sensor exceeds the set min or max warning value, an arrow appears at the top right (arrow up: max value exceeded, arrow down: min value exceeded)
2) Sensor is currently exceeding a value in the current display: Max exceeded (the number is red), Below Min (the number is blue)
3) Sensor is shown and has exceeded a threshold value in the past: a triangle appears next to the sensor (arrow up: max value exceeded, arrow down: min value exceeded)
4) If a sensor has been exceeded or fallen short of, you can see exactly which one in the sensor settings
The following control units are currently supported:
- trijekt (Premium, Bee, trigifant) - trijekt plus with restrictions
- Megasquirt 2 and 3
- K-Data KDFI
- UMC1/UMC2
- Ecumaster EMU Black and Classic (with Can Bus Adapter)
- van Kronenburg KMS MD35 and MP25 (with Can Bus Adapter) - VAG (VW/Audi/Seat)
- Motorsport Electronics ME221/ME442 (Can Bus)
- LinkECU
- MaxxECU
- Motec
- SCS Delta
- BMW E46 Can Bus Protocol
- VW/Audi Can Bus Protocol
– OBD2 Can Bus (250/500kbit 11/29bit)
With serial adapter:
- VEMS
- ME221
The MFD15 is delivered with:
- Display (MFD15)
- Rotary knob with 0.5m connection cable
- Adapter cable for connecting 12V and updating the display
- MicroUSB data cable for updates
- Connection plugs for analog inputs and Can Bus
- 20cm pre-crimped connection cable for Can Bus, analog inputs, 5V and sensor ground
- Pins to crimp yourself
With our OBD Plug and Play cable, the connection is made directly to the OBD socket. In addition, only the 12V supply has to be tapped with the enclosed fuse adapter.
The following values ​​are read out:*
- Speed ​​(RPM)
- engine load
- Fuel pressure (FuelPressure)
- Boost pressure (MAP)
- Vehicle speed (Speed)
- Ignition angle (IgnAng)
- Intake temperature (IAT)
- Air Mass (MAF)
- Oil temperature (OilTemp)
- Fuel pressure relative to intake vacuum (FuelRail)
- water temperature (CLT)
- Lambda1-8
- Cat Temperature Bank1 Sensor 1 (CatTemp1)
- Cat Temperature Bank1 Sensor 2 (CatTemp2)
- Cat Temperature Bank2 Sensor 1 (CatTemp3)
- Cat Temperature Bank2 Sensor 2 (CatTemp4)
- Additionally 4 analogue inputs
Pairs well with
CANchecked MFD15 Multi Function Display - Can Bus Connection
Get Expert Fitment and Technical Advice from Industry Specialists.
-
Shipping Information
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Mk5 R32 Turbo. I have had the best experience top quality service I would not think about going anywhere else! From helping me install my ecu over the phone with help on wiring sensors troubleshooting I would have been totally lost not to mention the remote mapping service so I was able to fit it in around work and other things the car runs like a dream pulls hard in all gears and is music to my ears. I will not take my cars anywhere else 5* Thank you for bringing my project to life
Something came up that required me to get a car part urgently and under a time limit and I was having trouble tracking down local businesses that could source it for me. Luckily, I came across Sameer’s contact information and reached out. He was brilliant - answered my query over the phone, got the part ordered as soon as was physically possible and kept me updated every step of the order and delivery process. He solved my issue with professionalism and expertise. Very happy with the service received.
Sam always does a quality job when it's comes to mapping my car. It has been with Sam multiple times for mapping, tweeking and problem solving and is very knowledgeable when it comes to ECU masters. The passion toward cars and mapping reflects in his work!
Absolutely great services. Great communication. Always ready to help. My car is now faster, more reliable, and made way more power. Sam is the man.
Great mapper. Have full confidence in him, helped out with everything i needed even when some things were not right with the car. Highly recommend👍