AEM Infinity 508 Stand-Alone Programmable Engine Management System For Polaris
AEM-30-7112
AEM Infinity 508 Stand-Alone Programmable Engine Management System for Polaris 2011-2014 RZR 900 & 2014-2015 RZR 1000
The Infinity ECU for 2014-15 Polaris RZR XP 1000 (Infinity 508 PN 30-7112) includes an engine-specific start-up calibration and connects to the engine via a Plug & Play harness that is sold separately (PN 30-3811).
Complete Stand Alone Engine Control
When combined with AEM’s Plug & Play Adapter Harness, the Infinity completely replaces the factory ECU and installs quickly using all supplied hardware and sensors. A base map for the engine is included to speed up the tuning process.
Tune it Once for Sea Level and Altitude
The provided RZR base calibration is set up to allow for one-time tuning of the VE table for all altitudes. It can be tuned at sea level and driven to high altitudes all while keeping AFRs on target without feedback.
Complete Plug & Play Systems for All RZR Models
A MAP sensor, AIT sensor, wideband AFR sensor and ignition coil driver are included in each Plug & Play RZR kit to ensure quick installation. Connections for the factory sensors are included on each Plug & Play wiring harness. The Infinity ECU supports the factory injectors and injector upgrades through the Wizard in the software. Drive-by-Wire is supported on RZR XP models and boost control with aftermarket turbo systems (boost control solenoid PN 30-2400 recommended, sold separately).
Full Dashboard Functionality
The Infinity ECU integrates with the RZR’s CANbus system to retain full dashboard functionality on each vehicle.
AWD Control is Fully Supported
AWD control is supported through the Infinity ECU to retain the RZR’s formidable off-road capabilities.
Closed-Loop Wideband Feedback Control
The Infinity ECU includes an on-board UEGO wideband air/fuel ratio (AFR) controller. A Bosch 4.2LSU UEGO sensor (PN 30-2001) is included with each Plug & Play kit.
Plug & Play Harness with Expansion Port
AEM’s sealed, weatherproof Plug & Play harness for Polaris RZRs includes an AEMnet port for communication with other AEMnet enabled devices.
An expansion port with a weatherproof 12-pin connector is included in the Plug & Play Adapter Harness for adding common aftermarket sensors including fuel and/or oil pressure (30-2130-150 150 PSI) and ethanol content (ethanol content sensor PN 30-2200 sold separately). The expansion port also includes a sensor ground, 5v reference, power from a relay and switched inputs for boost target, etc.
- Airflow model based (VE) tuning
- ECU Set Up Wizard simplifies start up
- Flex Fuel compatible
- Multi fuel capable
- Drive by wire
- Variable valve control
- Multiple boost control strategies
- Nitrous control
- Map switching (on-the-fly)
- Internal wideband UEGO air/fuel controller
- Dual knock sensing circuits
- Data logging up to 64 GB
- Outputs to 3rd party dashes and loggers
- Industry leading transfer speed
- Integrated engine protection strategies
- Sealed enclosure and IP67-rated comms ports
Pairs well with
AEM Infinity 508 Stand-Alone Programmable Engine Management System For Polaris
Get Expert Fitment and Technical Advice from Industry Specialists.
-
Shipping Information
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Mk5 R32 Turbo. I have had the best experience top quality service I would not think about going anywhere else! From helping me install my ecu over the phone with help on wiring sensors troubleshooting I would have been totally lost not to mention the remote mapping service so I was able to fit it in around work and other things the car runs like a dream pulls hard in all gears and is music to my ears. I will not take my cars anywhere else 5* Thank you for bringing my project to life
Something came up that required me to get a car part urgently and under a time limit and I was having trouble tracking down local businesses that could source it for me. Luckily, I came across Sameer’s contact information and reached out. He was brilliant - answered my query over the phone, got the part ordered as soon as was physically possible and kept me updated every step of the order and delivery process. He solved my issue with professionalism and expertise. Very happy with the service received.
Sam always does a quality job when it's comes to mapping my car. It has been with Sam multiple times for mapping, tweeking and problem solving and is very knowledgeable when it comes to ECU masters. The passion toward cars and mapping reflects in his work!
Absolutely great services. Great communication. Always ready to help. My car is now faster, more reliable, and made way more power. Sam is the man.
Great mapper. Have full confidence in him, helped out with everything i needed even when some things were not right with the car. Highly recommend👍